Comparison of creeping discharges propagating over pressboard immersed in olive oil, mineral oil and other natural and synthetic ester liquids under DC voltage

Abstract

This paper presents an experimental study on the characteristics of creeping discharges propagating over pressboard immersed in olive oil, rapeseed oil, tetra-ester, methyl oleate, and mineral oil, under both negative and positive DC voltages. The investigated characteristics are mainly the shape of discharges and their stopping lengths. Two experimental test cells are used: in the first one, the pressboard is inserted between pointe and plane electrodes so that the tip is perpendicular and at the center of the pressboard sample; and in the second one, the pressboard is placed between a point and bar electrodes in a way that allow a propagation in one direction (tangentially to pressboard). It is observed that the creeping discharges under DC voltage are not radial. Their shapes are different from those observed in previous work under AC and lightning impulse voltages. On the other hand, for given voltage and pressboard thickness, the stopping length L <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">f</sub> is shorter when the point is negative than when it is positive indicating that the flashover voltage will be greater with a negative point This also evidences a difference in the processes involved in each polarity especially the space charge resulting of the injected charges and the charge accumulated at the interface (including the charges resulting of double layer) as well as the evolution of the electric field in the vicinity of the point electrode and along the pressboard surface. For a given pressboard thickness, L <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">f</sub> increases with the voltage; it decreases when the thickness of pressboard is reduced.