Abstract
Synthesis of aluminium-containing nanoparticles (NPs) by electrical discharges was performed in three dielectric liquids (heptane, liquid nitrogen and water) with aluminium electrodes. The nature of the liquid plays an essential role in the synthesis yield and in the structural properties of NPs. Time-resolved optical emission spectroscopy of selected emission lines emitted during the discharge and its time afterglow was used to observe the chemical changes occurring in the gas phase. It turns out that in heptane and liquid nitrogen, crystalline metallic NPs (from 5 to 10 nm in diameter) are synthesized and oxidized next into amorphous alumina when they are in contact with air, once the liquid is evaporated. In heptane, the transformation of the liquid itself into hydrogenated amorphous carbon creates a kind a matrix in which the aluminium NPs are embedded. Sometimes, a protective graphite shell grows around the NPs and protects them from any further oxidation. In water, these crystalline metallic NPs are synthesized during the first 800 ns of the discharge process, when oxidation is limited by the outward flux of the metallic vapour. They are oxidized next in water. A second type of alumina NPs (several 10 s of nm in diameter) are produced from 800 ns on. They are likely formed from AlO molecules and no longer from aluminium atoms. In every liquid, sub-micrometric particles are also found due to droplet emission from the liquid well created during impacts of spark discharges on electrodes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have