Abstract
Abstract Industrial wastewater is subjected to strict environmental legislation, thus making its adequate management a key issue. In this research work, the final purification of two-phase olive mill wastewater (OMW-2) was investigated through four ion exchange resins (a weak-acid cation exchange resin, a strong-acid cation exchange resin, a weak-base anion exchange resin and a strong-base anion exchange resin). Central composite design was used for the optimization of the IE processes. Results revealed that the only final treated OMW-2ST effluent fulfilling the legislated requirements for drinking water was the one from the combination of the strong-acid cation exchange resin and the weak-base anion exchange resin. The proposed IE process yielded up to 88% removal of these pollutants when the initial pH, operating temperature and flow rate were set to 5.1, 26.8 °C and 12.1 L h−1, respectively. Under these conditions, the achieved concentrations for all contaminants in the final stream were maintained below the maximum established limits. Finally, high treated effluent volume recovery (28 L) could be achieved in continuous mode under the optimal operating conditions found, complying with standards for reuse in the production process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
