Comparison and evaluation of interphase momentum exchange models for simulation of the solids volume fraction in tapered fluidised beds

Abstract

Abstract An Eulerian computational fluid dynamics (CFD) model with granular flow extension was used to simulate a gas–solid fluidised bed in a tapered reactor. Various drag coefficient models were evaluated, which are used to calculate the drag force, describing the momentum transfer between the gas and solid phases. Comparison and evaluation between time-averaged solids volume fractions obtained from experiments and from simulations with several drag coefficient models were made. The predicted results obtained by the different drag models were verified using experimental data of Depypere et al. (2009) . Initial results using a 2-phase Eulerian model showed poor agreement with experimental results. However, extending the Eulerian model to include 3 solid phases—with different mean particle diameter per phase in order to account for the particle size distribution of the fluidised solid material—yielded good agreement with experimental results. Furthermore, quantitative analyses showed that the modified Gidaspow drag model gave the best agreement between CFD simulations and experimental data.