Comparison and Efficacy of Breast Pump Cleaning Techniques for Bioburden Reduction.

Abstract

Background: Donor milk is a good alternative for premature babies whose mothers cannot breastfeed. To reduce the risk of milk contamination, donors have to follow some hygiene instructions, including disinfecting their breast pump (BP). This study aims to investigate the efficacy of BP cleaning and disinfection methods. Methods: Contamination of BP parts was performed by passing milk inoculated with Bacillus cereus, Staphylococcus aureus, or Escherichia coli, through BPs. Devices were then rinsed with cold water or cleaned with hot soapy water. Disinfection was achieved using either a microwave or by immersing BP parts in boiling water. After treatment, residual bacteria were recovered by passing sterile phosphate buffer saline (PBS) through BPs before being inoculated on plates and performing bacterial counts. Method efficiency was assessed by comparing BP residual bioburden to results obtained from BPs that have not undergone cleaning or disinfection treatment (controls). Results: Rinsing BP parts with cold water leads to a diminution of residual bacteria in PBS recovered from device. This decrease is even more effective when hot soapy water is used. There is a slight persistence of all bacteria if disinfection of BPs is performed by using a microwave. This persistence reached up to 3.58 colony-forming unit/mL of sporulating B. cereus in PBS eluted from the pump parts. The use of boiling water, with or without cleaning step, removes bacteria to a level such that no residual contamination was observed. Conclusions: Cleaning BP parts in hot soapy water followed by a disinfection in boiling water ensures a completed decontamination of the BP. These results give evidences for instructions to milk bank donors for whom reducing risks of infections to minimal level is essential.