Abstract
Circulating fluidised bed combustion (CFBC) power plants produce large ash particles with elevated calcium (Ca) content as a by-product. Although it has pozzolanic potential, CFBC ash is not commonly accepted as an addition for cement. To enhance the activity of this material, in this experimental study CFBC ash was ground to a fineness equal to that of cement, simulating a joint milling with the clinker. This ground fly ash (GFA) was included in blended cements in ratios of 10, 20 and 40%. These new cements with GFA surpassed 52·5 MPa at 28 d for even substitutions as high as 40%. In comparison with a limestone addition – the most used in Europe – the cements with GFA presented higher compressive strength and better durability, with the only drawback being a slight reduction in workability. This CFBC fly ash could be used as clinker replacement once ground to a similar fineness to that of cement, allowing high reductions in clinker consumption and, consequently, its environmental impact.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.