Abstract
The production of biodiesel from crude palm oil (CPO) using microwave technique is investigated and has been compared with conventional heating. Two-step biodiesel production process is applied to maximize the highest biodiesel yield in short reaction time using microwave method. Sulfuric acid (H2SO4) as acid catalysts is used in pre-treatment of feedstock by esterification process followed by potassium hydroxide (KOH) as base catalyst for transesterification process with low methanol to oil ratio. The main purpose of the pre-treatment process is to reduce the free fatty acids (FFA) content of CPO from higher value of FFA content (>6.8%) to a minimum level for biodiesel production (<1%). Esterification and transesterification is carried out in fully instrumented and controlled microwave reactor system to get higher yield in shorter time. This two-step esterification and transesterification process showed that the maximum conversion of palm biodiesel obtained is 95.1% with the process conditions of methanol-to-oil molar ratio of 6:1, reaction temperature 65oC, reaction time 15min, and 2% (wt/wt) KOH amount using microwave method compared to conventional heating where the palm oil methyl ester (POME) yield obtained is 81% at the same conditions. The result showed that, the biodiesel production using microwave technique proved to be a fast and easy route to get high yields of biodiesel.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.