Abstract
In this study, Fe/Cu, Fe/Al/Cu, Fe/Cu/C and Fe/Al/Cu/C internal electrolysis systems (IESs) were constructed and used to treat methylene blue dye (MB) wastewater. The effects of filler mass ratio, filler dosage, solution pH, reaction time and reaction temperature on COD removal were discussed, while the kinetics, thermodynamics and mechanism of COD removal were also investigated. The results showed that when the COD removal rates were basically the same, the reaction times of Fe/Al/Cu, Fe/Cu/C and Fe/Al/Cu/C IESs were shorter, and the filler dosages were lower. For the four systems, the appropriate pH was around 5, while the suitable reaction temperature was in the range of 20–25 °C. The COD removals of these four IESs were generally greater than 90%. The COD removal processes of the four systems could be better described by the improved pseudo-second-kinetic model, and the liquid film diffusion was the rate-controlling step. Moreover, the COD removal was a spontaneous and endothermic process. MB was degraded into inorganic substances in four steps. In addition, the FTIR characterization of the fillers before and after reaction suggests the four IESs have good stability.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
