Abstract

In this work, the torrefaction of different parts of Norway spruce (stem wood, bark, and stump) was studied. Three different torrefaction temperatures were applied: 225, 275, and 300°C with 30 and 60min isothermal periods. The thermal stability as well as the evolutions of the decomposition products of the untreated and torrefied samples were measured by thermogravimetry/mass spectrometry (TG/MS). The TG/MS results are interpreted in terms of the chemical composition, namely the cellulose, hemicellulose and Klason lignin content. The inorganic components of the samples were measured by inductively coupled plasma-optical emission spectroscopy (ICP-OES) technique. It was found that the effect of torrefaction temperature was greater than the effect of residence time up to 275°C, while at 300°C the residence time had a significant influence on the composition of the torrefied samples due to the intensive decomposition of cellulose. Principal component analysis has been applied to find statistical correlations between the torrefaction temperature, the residence time, the chemical composition and the thermal parameters of the samples. The results of the principal component analysis confirmed that the chemical composition and hence the thermal properties of the studied samples changed to a greater extent at higher torrefaction temperature than at lower torrefaction temperature.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call