Abstract
A comparative study of the high-temperature oxidation behavior and mechanism of 0Cr25Ni20 austenitic heat-resistant stainless steel (AHSS) and 0Cr18AlSi ferritic heat-resistant stainless steel (FHSS) at 800°C, 900°C, and 1000°C in air up to 140 h was performed using isothermal oxidation tests. The oxidation kinetics of 0Cr25Ni20 AHSS and 0Cr18AlSi FHSS followed the parabolic law. The oxide films on 0Cr25Ni20 AHSS were composed of continuous and dense Cr2O3, MnCr2O4, and a small amount of NiMn2O4, whereas silicon exhibited internal oxidation and deteriorated the adhesion between the oxide film and substrate. Nickel-free 0Cr18AlSi FHSS exhibited good oxidation resistance at 800°C and 900°C due to dense, continuous, and well-adhered multicomponent oxide films containing Al2O3, Cr2O3, MnCr2O4, and a small amount of MnFe2O4. The oxidation resistance of 0Cr18AlSi FHSS declined at 1000°C, mainly due to the formation of nonprotective Fe2O3 and severe internal oxidation of aluminum.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
