Abstract
The microstructure, phase transformation behavior, heat treatment effects, and their impacts on the mechanical properties and high-temperature oxidation resistance of IN718 nickel-based superalloy processed by selective laser melting (SLM) both before and after heat treatment was systematically investigated. The heat treatment process involved a two-step aging at 720 °C for 8 h plus 620 °C for 10 h with a controlled slow cooling rate of 10 °C/min. Through the comprehensive use of scanning electron microscopy (SEM), X-ray diffraction (XRD), electron backscattering diffraction (EBSD), and transmission electron microscopy (TEM), the evolution of the microstructure and its mechanism of influence on material properties were revealed. The study identified the formation of γ phase, γ′ phase, γ'' phase, δ phase, and Laves phase during the SLM forming process. Heat treatment played a key role in improving the microstructure and properties of the SLM-processed alloy, with experimental results showing that the mechanical performance and high-temperature oxidation resistance were significantly enhanced after heat treatment. Specifically, the material after heat treatment exhibited a yield strength of 1472 MPa, a tensile strength of 1608 MPa, and an elongation of 9.2%, which represented increases of 76.5%, 38.4%, and 16.5% respectively, compared to the as-printed alloy. Moreover, the oxidation resistance at 1000 °C of the heat-treated samples improved significantly, with weight loss reduced from −0.17 mg/cm2 before heat treatment to −0.15 mg/cm2. Microstructural analysis further indicated that heat treatment optimized the crystal orientation, promoted the formation of more precipitated phases and reduced defects, thereby enhancing the overall performance of the material. This work provides significant scientific insights into understanding and optimizing the IN718 nickel-based superalloy processed by SLM, demonstrating the crucial role of heat treatment in improving its microstructure and properties.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
