Abstract
The forming, microstructure, mechanical properties and corrosion resistance of three kinds of vacuum electron beam welded joints with different shapes were studied. The results of X-ray inspection of the joints showed that the three shapes of welded joints could meet the requirements of the quality inspection. The results of microstructure characterization show that the worm or bone-like δ-ferrite appears in the upper and lower regions of the funnel-shaped and bell-shaped joints, while only a small amount of δ-ferrite appears in the local regions of the nail-shaped joints. The test results of mechanical properties show that the micro-hardness of the weld center in the three kinds of shaped joints is the lowest. All the specimens fracture in the weld, and the bell-shaped weld presents the highest impact energy and bending load. Funnel-shaped weld shows the worst corrosion resistance due to the element segregation of the weld. Thus, the bell-shaped joint exhibits the best comprehensive performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
