Abstract
A comparative study was performed on the inhibition of steel reinforcement corrosion using three soluble phosphates: sodium monofluorophosphate (Na2PO3F), disodium hydrogen phosphate (Na2HPO4) and trisodium phosphate (Na3PO4). Tests were carried out using ordinary Portland cement (OPC) paste specimens and OPC mortar specimens with embedded steel reinforcements. The corrosion inhibitors were deployed in two different ways: by immersion of OPC specimens in aqueous solutions containing the soluble phosphates (migrating corrosion inhibitor), and by addition of the phosphate powders to a fresh OPC paste (admixture corrosion inhibitor). After curing, the tested specimens were studied using X-ray diffraction, wavelength-dispersive electron microprobe analysis, linear polarisation resistance and electrochemical corrosion potential. A correlation was found between the phosphate content (by migration or admixture) in the OPC matrices and the steel corrosion rate.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
