Abstract

Three Ni-based superalloys, Haynes 214, Haynes 230 and Inconel 740H, have been analyzed for their mechanical behavior under conventional industrial hot-processing conditions. These and other comparable alloys are expected to be used in sCO2 heat exchanger cycles, as proposed in the Advanced Ultra-Supercritical (A-USC) program, due to their unique combination of mechanical, corrosion and creep properties. However, these alloys are difficult to form, specifically for sCO2 components, such as header pipes and manifolds, requiring optimal forming conditions. In this study, hot-deformation testing was conducted using a Gleeble 3500, to simulate temperatures and strain rates expected during industrial forming operations. The effect of using as-received material on the deformation behavior was analyzed, emulating microstructures under real conditions more accurately. The flow-stress curves for all three alloys showed the occurrence of dynamic recrystallization (DRX) with some signs of dynamic recovery, for the slowest strain rates and higher temperatures. Additionally, the influence of secondary phases on the hot deformation behavior was analyzed. The M6C-carbide in Haynes 230 showed the strongest effect, promoting recrystallization necklacing and inhibiting DRX growth. The activation energies for plastic flow were 246, 302 and 217 kJ mol−1, for Haynes 214, Haynes 230 and Inconel 740H, respectively. Hot-processing maps were generated for all alloys and suggested specific domains for optimal workability under the tested conditions. For Haynes 214, that is ε˙≤ 0.1/s and T ≥ 1050 ∘ C. For Haynes 230, it is 1050 ∘ C ≤ T ≤ 1150 ∘ C and 0.01/s ≤ε˙≤ 0.5/s. For Inconel 740H, it is 1010 ∘ C ≤ T ≤ 1075 ∘ C and 0.01/s ≤ε˙≤ 0.1/s.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call