Abstract
Herein, a study comparatively investigating the total oxygen (TO) and nitrogen (N) contents, evolution of inclusions, variations in slag composition, and nozzle clogging during the production of an interstitial‐free (IF) steel and a P‐containing high‐strength (HS) IF steel is presented. The results show that during the production of both steels, the TO content gradually decreases after the deoxidation, with the TO content in the molten steel in the tundish below 30 ppm. There is no significant variance in the N content. The two steels have similar quantities of small inclusions of similar types and sizes. However, the P‐containing HS IF steel has a much higher content of large inclusions, which mainly come from the entrapped mold powder and peeled‐off nozzle clogging. Compared to the common IF steel, the P‐containing HS IF steel has a higher MnO content in the slag during the Ruhrstahl–Heraeus process, compromising cleanliness control; the P‐containing HS IF steel has more significant mold liquid‐level fluctuations and more nozzle clogging, which mainly consists of Al2O3 and TiO2. The cause of these issues during the production of the P‐containing HS IF steel is concluded to be related to the high P content.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
