Abstract

Fengyun-3E (FY-3E)/Hyperspectral Infrared Atmospheric Sounder-II (HIRAS-II) is an extension Fengyun-3D (FY-3D)/HIRAS-I. It is crucial to fully explore and analyze the detection capabilities of these two instruments for atmospheric gas composition. Based on the observed spectral data from the infrared hyperspectral detection instruments FY-3D/HIRAS-I and FY-3E/HIRAS-II, simulated radiance data and Jacobian matrices are obtained using the Rapid Radiative Transfer Model RTTOV (Radiative Transfer for TOVS (TIROS Operational Vertical Sounder)). By perturbing temperature (T), surface temperature (Tsurf), water vapor (H2O), ozone (O3), carbon dioxide (CO2), methane (CH4), carbon monoxide (CO), and nitrous oxide (N2O), the brightness temperature differences before and after the perturbations are calculated to analyze the sensitivity of temperature and various atmospheric gas components. The Improved Optimal Sensitivity Profile (OSP) algorithm is used to select the channels for atmospheric gas retrieval. The observation error covariance and background error covariance matrices are calculated, and then the information capacity is calculated, specifically the degrees of freedom for signal(DFS) and the entropy reduction (ER). Based on this, a comparative analysis is conducted on the information capacity of atmospheric water vapor and ozone components contained in the hyperspectral detection data from HIRAS-I and HIRAS-II instruments, respectively, to explore the retrieval capabilities of the two instruments for atmospheric gas components. We selected clear-sky data from the African oceanic region and the Chinese Yangtze River Delta terrestrial region for quantitative analysis of the information capacity of HIRAS-I and HIRAS-II. The results show that FY-3D/HIRAS-I and FY-3E/HIRAS-II exhibit different sensitivities to atmospheric gas components. In different experimental regions, temperature and water vapor show the most dramatic sensitivity changes, followed by ozone, methane, and nitrous oxide, while carbon monoxide and carbon dioxide exhibit the lowest variability. Regarding channel selection, HIRAS-II identifies more gas channels compared to HIRAS-I. The experiments concluded that HIRAS-II has a significantly higher information capacity than HIRAS-I, and the information capacity of atmospheric gas components varies across different experimental regions. Water vapor and ozone exhibit the highest information capacity, followed by nitrous oxide and methane, while carbon monoxide and carbon dioxide demonstrate the lowest capacity. The H2O ER (DFS) contained in FY-3E/HIRAS-II is 1.51 (0.35) higher than that in FY-3D/HIRAS-I, the O3 ER (DFS) in FY-3E/HIRAS-II is 1.51 (0.36) higher than that in FY-3D/HIRAS-I, while the N2O ER (DFS) in FY-3E/HIRAS-II is 0.17 (0.19) higher and the CH4 ER (DFS) is 0.07 (0.04) higher than that in FY-3D/HIRAS-I.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call