Abstract
The objective of this research was to study the effect of different processing conditions on physical and sensory properties of potato chips. Potato slices of Desirée and Panda varieties (diameter: 30 mm; thickness: 3 mm) were pre-treated in the following ways: (i) control or unblanched slices without pre-drying; (ii) blanched slices in hot water at 85 °C for 3.5 min and air-dried at 60 °C until a final moisture content of ∼0.6 kg water/kg dry solid; (iii) control slices soaked in a 3.5 kg/m 3 sodium metabisulphite solution at 20 °C for 3 min and pH adjusted to 3. Pre-treated slices were fried at 120 and 140 °C under vacuum conditions (5.37 kPa, absolute pressure) and under atmospheric pressure until they reached a final moisture content of ∼1.8 kg water/100 kg (wet basis). An experimental design (3 × 2 3) was used to analyze the effect of pre-treatment, potato variety, type of frying and frying temperature over the following responses: oil content, instrumental color and texture and sensory evaluation. Vacuum frying increased significantly ( p < 0.05) oil content and decreased instrumental color and textural parameters. Sensory attributes, flavor quality and overall quality, were significantly improved using vacuum frying. The higher frying temperature (140 °C) increased Δ E, maximum breaking force, hardness and crispness and decreased L * and b * values. On the other hand, Panda potato variety improved the color of the product. A great improvement on color parameters was obtained using sulphited potato slices instead of the other pre-treatments. Although, the better flavor was obtained for control potato chips, no significant differences were found for overall quality between control and sulphited potato chips. Significant correlations ( p < 0.01) between sensory and instrumental responses were found.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have