Abstract
To improve innovative joining and deposition technologies for the construction of dissimilar joints, precise knowledge of the local mechanical properties of materials must be obtained. In the present article a comparative study of the tensile properties and fatigue behaviour in case of flat standard and micro-specimens of base materials Inconel 625, Inconel 718 and Ti-6Al-4V was accomplished. The aim of the study was to develop an efficient method for the investigation of the local mechanical properties by the use of micro-specimens subjected to electro discharge machining treatment and to obtain reliable tensile and fatigue test results. By the miniaturization of specimens a significant effect of roughness on mechanical properties was obtained. By considering a correction for the effective load-bearing cross-section the data obtained from micro-specimens are within 3% error with respect to standard specimen results. The results showed that the proposed technique can be successfully used to determine the tensile and fatigue properties of a small material volume.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
