Abstract

A combined magnetic resonance imaging (MRI) and computational fluid dynamics (CFD) modeling study was carried out for pulsatile flow in a carotid bifurcation phantom. The aim of the study was to quantify differences in flow patterns between MRI measurement and MRI-based CFD simulations and to further explore the potential for in vivo applications. The computational model was reconstructed from high resolution magnetic resonance (MR) scans. Velocities derived from phase-contrast MR measurements were used as boundary conditions for the CFD calculation. Detailed comparisons of velocity patterns were made between the CFD results and MRI measurements. Good agreement was achieved for the main velocity component in both well-behaved flow (in the common carotid) and disturbed region (in the carotid sinus). Comparison of in-plane velocity vectors showed less satisfactory consistency and revealed that the MR measurements obtained were inadequate to depict the secondary flow pattern as expected. It can be concluded that the combined MRI/CFD is expected to provide more reliable information about the full three-dimensional velocity field.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.