Abstract

Fast pyrolysis, hydropyrolysis and catalytic hydropyrolysis are three important methods to produce bio-oil from biomass and are of great interest to researchers. In this research, the comprehensive study of pyrolysis, hydropyrolysis and catalytic hydropyrolysis of poplar sawdust and rice husk was investigated in a modified laboratory Py-GC/MS microreactor system. Rh/ZrO2 (0.5 wt %) was prepared and applied in the catalytic hydropyrolysis process. An evaluation system including estimating method of product selectivity, the calculation method of O/C and H/C ratio, deoxygenation extent (DE) and hydrogen-loss extent (HLE), was established to fully measure the deoxygenation effect. The Rh/ZrO2-assisted catalytic hydropyrolysis showed a good deoxygenation effect as O/C ratios (0.10 for poplar sawdust, 0.11 for rice husk, respectively) are comparable to that of the reported upgraded bio-oil by hydrodeoxygenation (HDO). The highest hydrocarbon selectivity of 49.14% and DE of 87.6% were obtained in catalytic hydropyrolysis of poplar sawdust. For rice husk, the hydropyrolysis process gained a similar DE (82.7%) to that of the catalytic HyPy (83.7%), because rice husk with high ash content (19.4 wt %) contains a large number of mineral elements that are likely to form a self-catalysis effect. The reaction mechanism was further inferred according to product distribution and quantum calculation of oxygen-containing products, suggesting that Rh/ZrO2-assisted hydropyrolysis was accomplished by multistage reactions, involving initial pyrolysis of raw biomass and further deoxygenation of the pyrolysis intermediates. Moreover, this work can also provide a proven methodology and theoretical supports for future studies on catalytic hydropyrolysis of biomass.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call