Abstract
Ultraviolet (UV) photodetectors were fabricated with low temperature (<150 °C) solution-processed zinc oxide (ZnO) layers. A polydimethylsiloxane (PDMS) layer was used as the encapsulation to protect the devices from ambient effects. Current–voltage (I–V) characteristics, transient characteristics, and the encapsulation effect were compared for ohmic and Schottky contact devices that were formed with aluminum and silver electrodes, respectively. Schottky contact devices were shown to be able to achieve rapid response with the recovery time not affected by the encapsulation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have