Comparative Study of Different Materials for Occlusal Matrix Technique in Posterior Teeth

Abstract

Posterior composite restorations are difficult to contour and polish due to their occlusal anatomy and opposing occlusion. Our study describes a technique for duplicating occlusal surface anatomy, using different dental materials that are able to copy anatomic details. The aim of the study was to evaluate the efficiency of occlusal matrix technique, by comparing technical ease of different dental materials. The study was conducted on extracted teeth which had intact occlusal surfaces or initial carious lesions at this level. An impression of the occlusal surface was made prior to cavity preparation, with four different dental materials: a flow composite, a dual-cure resin cement, a temporary acrylic resin (powder and liquid) and a temporary crown and bridge two-component material in a Unidose®. When the last layer of composite has been placed, the occlusal matrix was forced into the uncured composite to replicate the original occlusal surface, instead of performing manual curing and shaping as in the standard approach. Time needed for complete finishing the case, the hardness of each occlusal matrix and the final morphology obtained were evaluated. The main benefits of the occlusal matrix technique are the technical ease of use due to its simplicity and its high accuracy in reconstructing occlusal morphology. Although the shortest time needed for occlusal matrix preparation was for the dual-cure resin cement, the best oclusssal matrix was obtained with the temporary acrylic resin (powder and liquid).