Abstract
The nanoscale heterojunctions in the nanofiber (NF) structure have been widely utilized in semiconductor metal oxide-based gas sensors to optimize the sensing characteristics. In this study, the CuO-Co3O4 composite and CuO/Co3O4 mixed-NFs were synthesized to compare the influence level of internal- and external- junctions within NF on the gas sensing characteristics. The gas-sensing properties of four kinds of sensors based on NFs (CuO-Co3O4 composite, CuO/Co3O4 mixed, pristine CuO, and pristine Co3O4 NFs) were investigated in the concentration ranges of 0.1–1 ppm H2S reducing gas and 1–10 ppm NO2 oxidizing gas at different working temperatures from 250 °C to 450 °C. In addition, the response/recovery times, and the detection limits of NF sensors toward the target gases were explored. The evidence confirmed that both the internal and external junctions influenced the gas sensing performances for the reducing and oxidizing gases in two opposite trends. The response of hetero-junction NF sensors was increased to H2S gas while reduced to NO2 gas. Thermal fingerprint analysis using the machine learning algorithm was applied to strengthen the selection of the gases. The results confirmed the internal junction existing within NFs was mainly governing the gas sensing performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
