Abstract
In this study, we reported a comparison study between the performance of the commercial non-noble metal cathode electrode (made by Hypermec™ K14 catalyst - provided by Acta S.p.A.) and cathode electrode containing 10 wt% Pt/C, in the alkaline direct ethanol fuel cell (ADEFC) under different conditions. Further electrochemical investigations have been done by RDE and driven mode cell to compare the intrinsic activity and selectivity of 10 wt% Pt/C and Hypermec™ K14 transition metals cathode catalysts. It is worthwhile to point out that Hypermec™ K14 cathode catalyst shows a remarkable selectivity to oxygen reduction and it has a superior intrinsic activity in oxygen reduction reaction (ORR) especially in terms of volumetric current density (A/cm 3). Test results of active DEFC made by non-noble cathode catalyst showed superior performance compared to the cell made by 10 wt% Pt/C cathode catalysts in terms of power density and OCV at 60 °C and ambient pressure. This result is related to the higher ORR kinetic of non-noble metal cathode catalyst in alkaline media.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
