Abstract
Thermal barrier coatings (TBC) are highly advanced material systems usually applied to metallic surfaces such as gas turbine or aero-engine parts to reduce temperature. Polyurethane was the main component composed from chain of organic units joined by urethane links. 10 samples have been prepared with 5 samples for every combination at 1 to 5 different weight percent for each composition and dried at room temperature for one week. The sample was being characterized based on adhesion using crosshatch test and thermal barrier conductivity to know the k-value of conductivity. PU with 3 and 5 wt% of TiO2 and 1 and 5 wt% of nanoclay (NC) showed the smoothest cross cuts. As a result, modified polyurethane with 5wt% of TiO2 or Nanoclay gives the good adhesion and k-value at 0.093 W.m-1.K-1.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
