Comparative Performance Analysis of Inverse Phase Active Vibration Cancellation Using Macro Fiber Composite (MFC) and Vibration Absorption of Silicone Gel for Vibration Reduction.

Abstract

This study focuses on addressing the issue of unwanted vibrations commonly encountered in various fields by designing an Active Vibration Cancellation (AVC) structure using a flexible piezoelectric composite material macro fiber composite (MFC). A comparative performance analysis was conducted between the AVC and a traditional passive gel that continuously absorbs vibrations. The results showed that AVC was more effective in mitigating vibrations, making it a promising solution for vibration control. The results of this study from extensive vibration-sensing experiments and comparisons revealed that AVC effectively cancels the vibrations and vibration absorption performance of the passive gel. These findings underline the potential of AVC as an efficient method for eliminating and managing undesired vibrations in practical applications. Specifically, AVC demonstrated a high vibration cancellation ratio of approximately 0.96 at frequencies above 10 Hz. In contrast, passive gel exhibited a relatively consistent vibration absorption ratio, approximately 0.70 to 0.75 at all tested frequencies. These quantitative findings emphasize the superior performance of AVC in reducing vibrations to levels below a certain threshold, demonstrating its efficacy for vibration control in real-world scenarios.