Abstract
This paper compared four parameters evaluating the dewaterability of sludge--capillary suction time (CST), specific resistance to filtration (SRF), bound water content, and dry solids content in the centrifuged sludge cake of the different sludge flocs from seven full-scale wastewater treatment plants. The dry solids content correlated with the normalized CST (R2 = 0.7112, p = 0.003), SRF (R2 = 0.6043, p = 0.011), and the bound water content (R2 = 0.8106, p = 0.001). The normalized CST was correlated significantly with SRF (R2 = 0.9450, p = 0.000) and correlated with the bound water (R2 = 0.5110, p = 0.0417). However, SRF correlated very weakly with the bound water (R2 = 0.3929, p = 0.0448). It is not necessary to use both CST and SRF at the same time to estimate the sludge dewaterability. The normalized CST is feasible because of its affordability, simple equipment, and measurement procedure. However, another parameter indicating the dewatering extent, such as dry solids content in sludge cake, should be applied together to evaluate the dewatering efficiency of the activated sludge.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
