Abstract
Biodiesel is a clean and renewable resource that consists of mono-alkyl esters of long chain fatty acid, which could be obtained from the transesterification reaction of vegetable oils and animal fats with alcohols and catalysts. Biodiesel yield has typically been determined using expensive and laborious techniques. The attempt of this study was to examine the potential of quantifying the biodiesel conversion in real time using refractive index in transesterification process of canola oil with methanol and KOH. Biodiesel yields at five different mixing intensities and reaction times were measured using a refractometer. The measured results were then compared with analytical data obtained from thermogravimetric analysis (TGA) technique over a temperature range of 25℃ - 600℃. Experimental results indicated that the FAME conversions at different mixing intensity and reaction time measured from refractometer correlated well to the relative weight losses from TGA method with R2 = 0.93 (p ≤ 0.05); however, the refractometer may over-estimate the biodiesel yield when the reaction rate was too low. Overall, the refractometer technique is cheaper and easier to manage and could provide a reliable prediction of biodiesel yield in real time.
Highlights
Fossil fuels, including oil, coal, natural gas, are still the leading energy for human activities
Biodiesel is a clean and renewable resource that consists of mono-alkyl esters of long chain fatty acid, which could be obtained from the transesterification reaction of vegetable oils and animal fats with alcohols and catalysts
This paper examined the potential of using a refractometer to measure the biodiesel yield in real time from the transesterification reaction in canola oil and methanol with the presence of KOH as the catalyst
Summary
Fossil fuels, including oil, coal, natural gas, are still the leading energy for human activities. Numbers of biodiesel characterization methods have been proposed and investigated by many researchers, including thermogravimetric analysis (TGA), gas chromatography (GC), near-infrared spectroscopy (NIRS), and high-performance liquid chromatography (HPLC) and Proton nuclear magnetic resonance (1H NMR) spectroscopy [2] [3] [4] [5] [6]. Among all these methods, 1H NMR spectroscopy is widely accepted as the standard characterization method [3] [4] [7]. They may require a pretreatment for samples, which is time consuming; tedious calibrations are usually needed before data analysis; very expensive instrument has to be equipped and experienced technicians are needed to collect and analyze data [8]
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.