Abstract
ABSTRACTAim:The aim of this study was to evaluate the surface hardness of a newly developed fiber-reinforced composite and bulkfill composites.Materials and Methods:Fiber-reinforced composite and other commercially available bulkfill composites were used. Fifteen cylindrical specimens (5 mm × 5 mm) were made from each material in metal template. Molds were filled in one increment for both bulkfill composites and fiber-reinforced composite and cured using Ivoclar blue phase light-curing unit at a wavelength of 850 mW/cm2. A dark container was used to store specimens to keep dry at room temperature for 24 h before testing. Vickers hardness number (VHN) on the top and bottom surfaces of each specimen was measured by a microhardness tester. Data for VHN were analyzed by using analysis of variance (ANOVA) and pair-wise Newman–Keuls test.Results:No significant difference was observed in Vickers hardness test. The mean value of VHN on the top and bottom surfaces showed significant difference from each other. Fiber-reinforced composite showed the highest VHN as compared with other materials.Conclusion:Fiber-reinforced composite has the highest Vickers hardness ratio indicating highest degree of conversion and better clinical performance.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
