Abstract

Utilization of vegetable tannins in leather processing is one of the convenient solutions to protect the environment pollution. Herein, the banana bunch and syrup of banana stem are utilized to prepare an ecofriendly tanning agent. The yield of banana bunch extraction efficiency is found 69.80 %. FT-IR analysis confirmed the presence of condensed type tanning component owing to the bearing of different polyphenolic groups. The content of tannins in extracted banana bunch and stem syrup is 3.13 % and 2.6 %, respectively. The phenolic content in the banana bunch extract is determined to be 1332.37 mg GAE/100g of dried weight and in syrup was 873.92 mg GAE/100g of dried weight. This makes it possible to be used as vegetable tanners. The extracted bunch and syrup are applied to re-tan leather and compared with conventionally used vegetable tanning agent (quebracho) in parallel. Tensile strength, tear strength and elongation percentage for the extracted banana bunch and syrup are obtained at 23.84 N/mm2, 68.26 N/mm, 47.07 %, and 22.97 N/mm2, 68.38 N/mm, 40.70 %, respectively. The softness is found 1.41 for the extracted bunch and 2.01 for the syrup. The grain crack load, distension at grain crack, strength at ball burst, distension at ball burst are 246.86 N, 13.24 mm, 530.77 N, 24.54 mm for banana stem syrup and 338.77 N, 13.42 mm, 460.65 N, 29.08 mm for bunch extract, respectively. The shrinkage temperatures recorded for banana bunch extract, syrup and Quebracho (control trial) tannins tanned leather samples are 76.5 °C, 75 °C and 84 °C subsequently. The flexing endurance of the bunch extract and syrup revealed acceptable values that are less than 4. Moreover, the bunch extract tanned leather shows greater thermal stability and for syrup it is similar with the quebracho tanned leather. All the results are satisfactory compared to the control trial. Finally, tanned leather is evaluated to assess the possibility of the newly developed tannin which proves its efficiency as a potential source of tanning material for the leather industry.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.