Abstract
In this study, nanotoxicity tests were made by exposure of Artemia salina to copper (Cu 60–80 nm) and copper oxide (CuO 40 nm) nanoparticles (NPs) at different concentrations (0.2, 1, 5, 10, 25, and 50 mg/l) during some exposure duration. Characterization of Cu and CuO NPs were performed using Transmission Electron Microscope (TEM), Dynamic Light Scattering (DLS), Zeta Potential, X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Fourier Transformation Infrared (FT-IR) analyzes. In organisms, the accumulation and elimination rates of NPs was determined by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) analysis and the oxidative stress effects on A. salina were determined by Glutathione (GSH) and Thiobarbituric acid reactive substances (TBARS) analysis methods. Both NPs were found to differ in accumulation and elimination rates at each application time and in parallel with the increase in concentration. In each group, it was determined that ion release increased with application time. The results showed that the accumulation rates in Cu NPs had a tendency to increase at 48 h and to decrease at 72 h in concentrations of 0, 2 and 1 mg/l, respectively. And in the all other concentrations have been seen an increasing trend within the time. In the CuO NPs (40 nm), accumulation rates were a decrease trend at 48th hour and an increase trend at 72nd hour except 10 mg/l concentration. In the 10 mg/l group was an increase trend with the application period. Cu NP, TBARS value increased with increasing concentrations and the highest increase was observed at 24 h of 5 ppm group. The groups showed a tendency to increase-decrease-increase-decrease in TBARS levels in terms of elapsed time (24th, 48th, 72nd hour and elimination) (5 ppm and 10 ppm groups tended to decrease in TBARS level at 72nd hour). TBARS increased with increasing concentration ratios in CuO NPs (40 nm).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.