Abstract
Based on 7m length×7m weight×50m depth vertical underground garage of old residence communities in Shanghai China, the new article ground freezing (AGF) method— Box-frozen method was studied. The elastic theory calculation and numerical simulation showed that the thickness of straight (hq ) and bottom (hd ) frozen wall are 2.8m and 10m respectively, which can meet load bearing and water insulation requirements. Three artificial freezing design schemes and parameters were proposed according to different freezing hole layout, namely, 1) double row holes and cutting bottom holes;2) double row holes and leave bottom holes;3) single row holes and leave bottom holes. Evolution law of temperature field of different Box-frozen design schemes was checked by numerical simulation. The results showed that, during maintenance freezing period, both of double row holes and cutting bottom holes and single row holes and leave bottom holes schemes appear thaw phenomenon at bottom of frozen wall while double row holes and leave bottom holes stops thaw tendency basically. Three Schemes are compared in four aspects including construction period, cost, excavation difficulty and risks, which prove that double row holes and leave bottom holes scheme are a most suitable article ground freezing method due to less construction period and low risk.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.