Comparative Analysis of Three Different Impression Techniques for Impression Defects and Dimensional Accuracy Using a Digital Intraoral Scanner for Fixed Partial Dentures: An In Vivo Study.

Abstract

To evaluate the impression defects and compare the dimensional accuracy of three different impression techniques (single-step, two-step without spacer, two-step with spacer) for fixed partial dentures using a digital intraoral scanner in the anterior maxillary region. Thirty subjects, above the age of 18 years with maxillary central/lateral incisor requiring fixed prostheses were selected according to the inclusion and exclusion criteria. The impressions were rated and evaluated using Heine C2.3K Binocular loupes (Heine Ltd., Dover, NH, USA). An intraoral scanner and digital vernier calipers were used to study and compare the dimensional accuracy of all three impression techniques. Results: Statistical analysis using the chi-square test revealed that the single-step double mix technique showed the least number of defects (40%), followed by the two-step without spacer (56.7%) and then the two-step with spacer (80%) impression techniques. Using Kruskal Wallis and Mann Whitney U test for dimensional accuracy, it was found that the two-step with spacer impression technique was closer to the control group (intraoral scanner) followed by the two-step without spacer and then the single-step double mix impression techniques. All three impression techniques showed the presence of impression defects, mainly voids and bubbles. The single-step double mix and two-step without spacer techniques had more favourable outcomes compared to the two-step with spacer impression technique. The two-step with spacer impression technique was dimensionally more accurate compared to the two-step without spacer and single-step double mix techniques for fixed partial dentures.