Abstract
This research based on the mineral base oil formulated in different additives for Automotive engines. In this experiment, performance of two different groups of mineral base oil are investigated, one of which is Group-1 base oil while the other is Group-II base oil. Different products are prepared for automobile like Motorcycle, CNG Car and Diesel engine with the required additives. Then, the samples were used in the respective vehicles and samples it is observed that the viscosity at 100oC of Group-2 base oil’s products depleted about 4.91%, 5.91% & 9.55% while of Group-1 Base oil’s products are about 16.5%, 10% & 26.08% for Motorcycle, CNG engine car and Diesel engine respectively. Similarly, the flash point of Group-2 base oil’s products decreases less as compare to the products of Group-1 base oil, hence the results of the samples are use shows that the products blended in Group-2 base oil perform better and run longer than the products blended in Group-1 base oil.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
