Comparative analysis of pore structure parameters of coal by using low pressure argon and nitrogen adsorption

Abstract

The accurate characterization of coal pore structure is of great significance for in-depth understanding of interior properties and gas adsorption, desorption and diffusion characteristics. In this study, the low pressure argon adsorption (LP-ArGA) and low pressure nitrogen adsorption (LP-N2GA) were all used to analyze the pore parameters of coal with different metamorphism. The results indicated that the adsorption isotherm type and desorption hysteresis type of coal samples obtained by the LP-ArGA and LP-N2GA belong to the same type, but the adsorption capacity of the former is higher than that of the latter. The pore size distribution (PSD) of coal samples shows a significant multi-peak distribution feature. Compared with the LP-N2GA, the LP-ArGA can accurately analyze the pore parameters between 2 and 4 nm or part of 2–7 nm. The mesopore volumes obtained by the LP-ArGA is 1.66–2.84 times that of the LP-N2GA, and there is no obvious law of macropore volume. The macropore volumes of QN and PM samples decreased by 17.2% and 50.9%, respectively, while GHS sample increased by 166.0%. The corresponding specific surface area (SSA) showed the same properties. Fractal curve fitting results obtained by the two methods are highly correlated, but compared with LP-ArGA, D1 and D2 obtained by the LP-N2GA can well reflect pore characteristics. The fractal dimension obtained by the two methods and the variation trend with the metamorphic degree are all different, which is mainly due to the difference of adsorption volume. The purpose of this paper is to introduce a new method for the analysis of coal pore structure in order to better understand the pore characteristics.