Comparative analysis of laser power, pure titanium, and titanium alloy effects on dendrite growth and surface morphology of TiO2-ceramic

Abstract

Despite several challenges, including the inherent brittleness of ceramics, inadequate melting of the powder, and the formation of microstructural defects, laser powder bed fusion remains a promising method for ceramic fabrication. This research looks at the intricate relationship between laser power as a dominant factor in the energy density, the influence of pure titanium (Ti) and titanium alloy (Ti-6Al-4V) additives on the laser fabrication of TiO2-based ceramics, and the resultant microstructural aspects, with a particular emphasis on dendritic growth and solidification defects. The research findings revealed that changing the laser energy density has a substantial influence on the dendrite growth and solidification rate of TiO2 ceramic. However, in addition to optimizing the laser power, the addition of metal material additives also plays a significant role in regulating the melting state and controlling the part defects in ceramics. The findings support that the mixing of pure titanium showed a relatively favorable influence, enhancing the melting condition of TiO2 and yielding a smooth surface with reduced defects. Conversely, the addition of a titanium alloy (Ti-6Al-4V) has a comparatively lower positive effect and led to the formation of substantial dendrites, solidification shrinkage, and significant fractures. The change in the scanning strategy from zigzag to island has no noticeable effect on the surface morphology and dendrite formation but contributes to controlling the spattering and crack propagation.