Comparative analysis of extraction methods in distilled drinks production

Abstract

The paper presents the results of studying the extraction process in the technology of distilled drinks production at the stage of their aging with the use of oak chips, which reduces the duration of the technological process and reduces technological losses. At the engineering center “FOOD ENGINEERING” of Kemerovo State University, two extraction methods were selected for studying: 1) using a batch extractor for the “solid - liquid” system with exposure to oxygen, and 2) extraction based on the effects of microwave radiation. A comparative analysis of these processing methods has shown that the method of exposure to oxygen is more effective, taking into account the increase in optical density. The degree of oak chip charring was found to affect the color of the product significantly. Microwave radiation contributes to a more intensive accumulation of polyphenols, especially while using the chips with strong charring. When exposed to oxygen, the degree of charring had little influence on the content of polyphenols; still, exposure to oxygen intensified the process of phenolic compound extraction. The content of extractive solid compounds is higher in the samples exposed to oxygen and microwave radiation compared to the control sample, with little difference between different varieties of oak chips. In this regard, it has been planned to conduct further studies of the joint effect of these intensification methods on the extraction process.