Abstract

Vertical cavity surface emitting laser (VCSEL) is an important laser source for their evident plentiful applications in optical communication. The present investigation reports a comparison of the modeling and optimization of long wavelengths 1310 nm and 1550 nm high speed short cavity VCSEL for continuous wave operation at various temperature (283-3230K) for various diameters. The continuous wave lasing is demonstrated for the device diameter from 2 to 5 μm with threshold current of 1.07-1.33 mA with threshold power consumption of 1.86-2.57 mW for 1310 nm and threshold current of 0.94-1.24 mA and threshold power consumption 1.67-2.1 mW for 1550 nm VCSEL. The results demonstrate that the threshold current, peak emitted power and power consumption increases with the increase in device diameter. The results confirm that VCSELs with 2 μm diameter is most suitable to achieve energy-efficient operation. Although rollover current increases with the diameter, but, due to the advantage of lower threshold current and power consumption, VCSEL having smaller diameter is best suited. The power conversion efficiency for proposed long wavelength VCSELs is approximately 50% which is extremely useful for low power applications. The proposed VCSELs are suitable for very short reach (<2 m) optical interconnects such as chip-to-chip and board-to-board communication in high performance computers.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.