Comparative Analysis of Dynamic Behavior of Liquid Droplet Impacting Flat and Circular Wires

Abstract

The performance of droplets captured by the wire mesh demister in a seawater desalination system seriously affects the quality of water desalination. Therefore, it is of great significance to study the droplet impact in the wire mesh demister to improve the demister’s efficiency. In this paper, a two-dimensional model of the droplet impacting the wire is established. The processes of the droplet impacting a flat wire and a circular wire are simulated by using the VOF model in Fluent, and a comparative analysis is conducted. The results demonstrate that both wires experience spreading and splashing stages, but when the wire is circular, the length of the lifted lamella is longer, the peak force on the wall is larger, the splash’s start time is earlier, and the number of secondary droplets is greater; the variation rule of the force on the wall caused by the change of initial velocity is similar, and the increase in initial velocity will promote the occurrence of splash phenomenon, but the role of the initial velocity on the splash effect is more obvious for the circular wire; and when the droplet impacts the flat wire, the influence of incident angle on the critical splash velocity is non-monotonic, but the critical splash velocity increases with an increase in incident angle when the wire is circular.