COMPARATIVE ANALYSIS OF CARBOXYMETHYL CELLULOSE AND PARTIALLY HYDROLYZED POLYACRYLAMIDE – LOW-SOLID NONDISPERSED DRILLING MUD WITH RESPECT TO PROPER-TY ENHANCEMENT AND SHALE INHIBITION

Abstract

During drilling, different problems are encountered that can interfere with smooth drilling processes, including the accumulation of cuttings, reduced penetration rates, pipe sticking, loss of wellbore stability, and loss of circulation. These problems are generally encountered with conventional drilling mud, such as the bentonite–barite mud system. Formation damage is the most common problem encountered in bentonite mud systems with high solid content. In this work, we aimed to formulate two low-solid nondispersed (LSND) muds: carboxymethyl cellulose (CMC)–LSND mud and partially hydrolyzed polyacrylamide (PHPA)–LSND mud. A comparative analysis was performed to evaluate their property enhancements. LSND muds aid in maintaining hole stability and proper cutting removal. The results of this work show that the addition of both CMC and PHPA helps to improve drilling fluid properties; however, the PHPA–LSND mud was found to be superior. Shale swelling is a major concern in the petroleum industry, as it causes various other problems, such as pipe sticking, low penetration rates, and bit wear. The effect of these two LSND polymer muds in inhibiting shale swelling was analyzed using shale collected from the Champhai district of Mizoram, India.