Abstract
Accurate positioning and state estimation of surface vessels are prerequisites to achieving autonomous navigation. Recently, the rapid development of 3D LiDARs has promoted the autonomy of both land and aerial vehicles, which has aroused the interest of researchers in the maritime community accordingly. In this paper, the state estimation schemes based on 3D LiDAR scan matching are explored in depth. Firstly, the iterative closest point (ICP) and normal distribution transformation (NDT) algorithms and their variants are introduced in detail. Besides, ten representative registration algorithms are selected from the variants for comparative analysis. Two types of experiments are designed by utilizing the field test data of an ASV equipped with a 3D LiDAR. Both the accuracy and real-time performance of the selected algorithms are systemically analyzed based on the experimental results. It follows that ICP and Levenberg–Marquardt iterative closest point (LMICP) methods perform well on single-frame experiments, while the voxelized generalized iterative closest point (FastVGICP) and multi-threaded optimization generalized iterative closest point (FastGICP) methods have the best performance on continuous-frame experiments. However, all methods have lower accuracy during fast turning. Consequently, the limitations of current methods are discussed in detail, which provides insights for future exploration of accurate state estimation based on 3D LiDAR for ASVs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.