Abstract
Broken coal and rock (BCR) are an important component medium of the caving zone in the goaf (or gob), as well as the main filling material of fault fracture zone and collapse column. The compaction seepage characteristics of BCR directly affect the safe and efficient mining of coal mines. Thus, numerous laboratory studies have focused on the compaction seepage characteristics of BCR. This paper first outlines the engineering problems involved in the BCR during coal mining including the air leakage, the spontaneous combustion, the gas drainage, and the underground reservoirs in the goaf. Water inrush related to tectonics such as faults and collapse columns and surface subsidence related to coal gangue filling and mining also involve the compaction seepage characteristics of BCR. Based on the field problems of BCR, many attempts have been made to mimic field environments in laboratory tests. The experimental equipment (cavity size and shape, acoustic emission, CT, etc.) and experimental design for the BCR were firstly reviewed. The main objects of laboratory analysis can be divided into compression tests and seepage test. During the compaction test, the main research focuses on the bearing deformation characteristics (stress-strain curve), pore evolution characteristics, and re-crushing characteristics of BCR. The seepage test mainly uses gas or water as the main medium to study the evolution characteristics of permeability under different compaction stress conditions. In the laboratory tests, factors such as the type of coal and rock mass, particle size, particle shape, water pressure, temperature, and stress path are usually considered. The lateral compression test of BCR can be divided into three stages, including the self-adjustment stage, the broken stage, and the elastic stage or stable stage. At each stage, stress, deformation, porosity, energy, particle size and breakage rate all have their own characteristics. Seepage test regarding the water permeability experiment of BCR is actually belong to variable mass seepage. While the experimental test still focuses on the influence of stress on the pore structure of BCR in terms of gas permeability. Finally, future laboratory tests focus on the BCR related coal mining including scaling up, long term loading and water immersion, mining stress path matching were discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.