Abstract

In the paper, a compact quad-band polarization-independent metamaterial absorber has been presented for different microwave frequency bands. The proposed absorber unit cell comprises of two square and two concentric circular rings and it exhibits the absorption peaks greater than 90% at 3.1 GHz, 5.5 GHz, 7.6 GHz and 10.98 GHz respectively under the normal incidence. The full width at half maximum (FWHM) bandwidth is 150 MHz (3.03–3.18 GHz), 180 MHz (5.38–5.56 GHz), 330 MHz (7.44–7.77 GHz), and 560 MHz (10.70–11.26 GHz) at the four frequency bands. The proposed absorber is polarization and incidence angle insensitive due its symmetrical. The proposed structure also shows more than 90% absorptivity up to 60° incidence angle. The absorber unit cell is compact in configuration with size of 0.12 λo × 0.12 λo and ultrathin thickness of 0.016 λo, where λo is the wavelength at lowest frequency absorption peak. To recognize the absorption phenomenon of the absorber, input impedance, E-field and surface current distribution characteristics have been demonstrated. The structure has been fabricated and it shows good agreement between simulated and measured results.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.