Abstract
A compact reconfigurable multi-band monopole antenna is presented. To achieve frequency reconfigurability, a PIN diode is used. There are two states of switch. State 1: when the switch is OFF, the antenna operates at four bands: 2.45, 3, 3.69, and 5.5GHz with impedance bandwidth of 9.95, 5.96, 12.57, and 10.76%, respectively. State 2: when a switch is ON, the antenna operates at 2.64, 3.67, 4.94, and 5.3GHz with impedance bandwidth of 21.15, 11.76, 5.79, and 4.12%, respectively. Folded and meandered techniques are used for miniaturize antenna size. Antenna size is 15mm×37mm×0.8mm and the radiator part is 15mm×9mm×0.8mm. The proposed antenna is used in several applications such as Bluetooth (2400–2484MHz), WLAN [802.11b/g/n (2.4–2.48GHz), 802.11y (3.657–3.69GHz), 802.11y (4.9GHz), 802.11a/h/j/n (5.2GHz)], Wi-MAX (2.5–2.69GHz), LTE (band 7, band 38, band 41, and band 43) and S-DMB (2605–2655MHz). The antenna is analyzed using the transient solver of CST Microwave Studio. The proposed antenna was fabricated and tested. Measurements and simulations show good agreement.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Electrical Systems and Information Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
