Abstract
AbstractA novel design of a simple microstrip‐fed monopole antenna well suited to wireless local area network (WLAN)/worldwide interoperability for microwave access (WiMAX) application for triple‐band operation is proposed in this article. The proposed antenna consists of one branch strip, two hook‐shaped strips, an asymmetrical ground plane, and a rectangular slit in the ground plane. Through the proper selection of the dimensions as well as arrangement of the strips, desired resonant modes excited at 2.35/3.65/5.375 GHz with a less than −10‐dB input impedance frequency response can be achieved. Prototypes of the proposed antenna were fabricated and experimentally measured, and an acceptable agreement between the measurement and simulation results was achieved. The numerical and experimental results demonstrate that the proposed antenna satisfies the −10‐dB impedance bandwidth requirement while covering the WLAN and WiMAX bands simultaneously. Meanwhile, the 2D radiation patterns and 3D gain performance of the antenna in the operation bands were also observed and discussed. © 2012 Wiley Periodicals, Inc. Microwave Opt Technol Lett 54:1838–1846, 2012; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26963
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
