Abstract
In this paper, a novel compact microstrip lowpass filter is designed. The proposed filter which is etched on the 50 Ω microstrip line consists of four non-uniform 1-D microstrip photonic bandgap (PBG) cells with different cutoff frequency.. The demonstration lowpass filter with 2.2 GHz cutoff frequency is designed, fabricated and measured. The measurement results show that the band rejection effect is better than -20 dB from 2.8 GHz to 10 GHz, the insertion is less than 2 dB, and the length of filter is 5.6 cm long. Compared with the conventional filter, the proposed filter has smaller size. Meanwhile, it overcomes the problems of narrow stop-band and low harmonic suppression. Furthermore, the impedance matching is not need to be considered. This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
