Abstract
In this paper, we propose the first ARIA block cipher on both MSP430 and Advanced RISC Machines (ARM) microcontrollers. To achieve the optimized ARIA implementation on target embedded processors, core operations of ARIA, such as substitute and diffusion layers, are carefully re-designed for both MSP430 (Texas Instruments, Dallas, TX, USA) and ARM Cortex-M3 microcontrollers (STMicroelectronics, Geneva, Switzerland). In particular, two bytes of input data in ARIA block cipher are concatenated to re-construct the 16-bit wise word. The 16-bit word-wise operation is executed at once with the 16-bit instruction to improve the performance for the 16-bit MSP430 microcontroller. This approach also optimizes the number of required registers, memory accesses, and operations to half numbers rather than 8-bit word wise implementations. For the ARM Cortex-M3 microcontroller, the 8×32 look-up table based ARIA block cipher implementation is further optimized with the novel memory access. The memory access is finely scheduled to fully utilize the 3-stage pipeline architecture of ARM Cortex-M3 microcontrollers. Furthermore, the counter (CTR) mode of operation is more optimized through pre-computation techniques than the electronic code book (ECB) mode of operation. Finally, proposed ARIA implementations on both low-end target microcontrollers (MSP430 and ARM Cortex-M3) achieved (209 and 96 for 128-bit security level, respectively), (241 and 111 for 192-bit security level, respectively), and (274 and 126 for 256-bit security level, respectively). Compared with previous works, the running timing on low-end target microcontrollers (MSP430 and ARM Cortex-M3) is improved by (92.20% and 10.09% for 128-bit security level, respectively), (92.26% and 10.87% for 192-bit security level, respectively), and (92.28% and 10.62% for 256-bit security level, respectively). The proposed ARIA–CTR implementation improved the performance by 6.6% and 4.0% compared to the proposed ARIA–ECB implementations for MSP430 and ARM Cortex-M3 microcontrollers, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have