Abstract
Understanding the CM inductor core saturation mechanism and reducing core flux density is critical for CM inductor design optimization. Instead of a time domain method, this paper introduces frequency domain spectrum concept for CM inductor core saturation analysis and design optimization, which will provide designers a better understanding of CM inductor design. First, both core permeability and converter modulation index's opposite influence on DM flux density and CM flux density are identified. Then, CM flux density is further investigated based on the spectrum concept. Three components in the CM inductor which may cause large CM flux density and core saturation are summarized: (1) switching frequency related components, (2) impedance resonance frequency related components, and (3) modulation frequency related components. Each component is investigated for CM flux density reduction and filter design optimization. A connecting AC and DC side midpoint with notch filter structure is proposed to reduce modulation frequency related components. Experiment results are presented to verify the proposed concept and method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.