Abstract
The EDIPO test facility is erected at CRPP Villigen with the aim of providing a flexible, high field test bed for high current force flow superconductors. The EDIPO main coil is a tilted-head race-track pair wound by a graded Nb3Sn cable-in-conduit conductor. The whole project, partly funded by the European Commission, started in 2004 and entered the commissioning phase in 2013. The final steps of instrumentation and installation of the main coil, delivered by industry in May 2011, lasted about 18 months. The first cool-down of the facility started in November 2012. The commissioning of the main coil, including the precise measurement of the generated magnetic field, was carried out in March 2013. At an operating current of 17.2 kA, a ± 1% homogenous field of 12.35 T was generated over a length of 900 mm in the center of the test well, 140 mm × 91 mm in cross section. Details about cool-down, flux jumps, forces and displacements, field map, and charging rate are presented in this paper.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.