Comment on amt-2022-279

Abstract

<strong class="journal-contentHeaderColor">Abstract.</strong> The measurement of volatile organic compounds (VOCs) can be influenced by ozone (O₃), resulting in sampling artifacts that corrupt the data obtained. Published literature reports both, positive (false enhancements of signal) and negative (loss of signal) artifacts in VOC data due to ozonolysis occurring in the sample gas. To assure good data quality it is essential to be aware of such artifact inducing processes, characterize them and try to minimize the impact with a suitable sampling setup. Here we present results from experiments with a sodium thiosulfate ozone scrubber (Na₂S₂O₃), which is a cost effective and easily applied option for O₃ scavenging during gas phase sampling. Simultaneous measurement of selected organic trace gases using gas chromatography- and proton transfer reaction-mass spectrometry was performed at different ozone levels (0&ndash;1 ppm) and different relative humidities (0&ndash;80 %). In this way both tropospheric and stratospheric conditions were examined. The measured data show that several carbonyl compounds including acetaldehyde, acetone and propanal show artificial signal enhancement when ozone is present at higher concentrations (&gt;150 ppb) in dry air, while analytes with double bonds like isoprene (measured with GC-MS) and terpenes show lower signals due to reaction with ozone. Both effects can be eliminated or in the case of sesquiterpenes substantially reduced by using Na₂S₂O₃ impregnated quartz filters in the inlet line. With the chosen scrubbing material, relative humidity (RH) substantially improves the scrubbing efficiency. Under surface conditions between 50&ndash;80 % RH, the filter allows accurate measurement of all species examined.